Embedded Composition
Login
Hyperstone's E1-32XSR
注意
更多信息请点选档案下载有些档案可能需要注册才能下载。
Hyperstone RISC/DSP特性及差异
Hyperstone RISC/DSP
  • 32-bit RISC/DSP processor
  • Parallelism of ALU, DSP unit and Load/Store unit
  • 16, 32, 48-bit instructions
  • 64 local, 26 global registers
  • Local regs organized in circular
  • 4 GByte memory address space
  • Separate I/O address space
  • 16 kByte RAM on-chip (1 cycle)
  • On-chip instruction cache
  • Separate address and data bus
  • 32-bit timer and watchdog timer
  • Comprehensive controller for DRAM, SDRAM
  • Programmable bus timing for all
  • Clock frequency:
    - i.e. E1-32XSR 120 MHz in 0.25µm
    - Implementations in 0.18µm up to 220 MHz
  • On-chip PLL (8:1,4:1,2:1,1:1,0.5:1)
  • Static design
  • 120 MIPS and up to 480 MOPS in 0.25 µm; 220 MIPS and up to 880 MOPS in 0.18µm 
  • up to 2445 MIPS/Watt
  • 1 k complex FFT in 0.25 ms
  • 4 cycle MPY (32 x 32 bit)
  • 1 cycle MPY (16 x 16 bit)
  • 1 cycle multiply-add (pipelined)
  • 1 cycle MOV, ADD, CMP, SHIFT
  • 1 cycle DRAM read or write (pipelined)
  • Glue-less memory- and I/O-connection
  • Less than 0.41 mW / MHz power dissipation
  • Fully automatic power-down mode
  • Clock-off function
类型
Hyperstone E1-32X RISC/DSP家族有许多形式.就总线的数据宽度而言, E1-32X系列为32bit, E1-16X系列为16bit. 就封装形式而言,E1-32X系列为144-pin TQFP (20x20x1.4mm),E1-16X系列则是非常小型的100-pin TQFP (14x14x1.4mm)包装.每种形式都有附加在芯片上的16kByte RAM,并且每个计算机操作时最大速率可达120 MHz unb 0.25 µm.